158.00 - 83.74
About LetonPower S2
LetonPower is a diving lighting equipment brand located in Shenzhen, China, dedicated to the development of strong performance, stable quality diving lighting products, And achieved a greater technical advantage. The S2 is the second in the LetonPower S-Series and also features the latest integrated design and production processes, our latest underwater light complement and a very high price/performance ratio.
We will provide the following services for S2:
1: Onlychange without repair; within 1 years, if the flashlight is damaged and cannot work normally, we will replace the new product for you for free. (You do not need to bear any expenses)
2. If it is damaged after two years, you only need to pay 50% of the cost and we will give you a new product.
3.If you want to repair the torch yourself, we can provide all the accessories for free.
Material: Original all-in-one Aluminum alloy
Bulbs：Lamp beads: customized COB lamp beads, color rendering index Ra90+
Chargin mode:Type-C charging (can be directly charged with mobile phone charger)
Reachable depth of water: under 100 meters of water
Beam angle:120 degrees
Weight: 640g(without handle weight)
Built-in 14400mah Battery
The flashlight has a built-in 3x 4800mah 21700 power battery.
5000Lumens:can work continuously for 240 minute
9000Lumens:can work continuously for 180 minutes
18000Lumens:can work continuously for 90 minutes
(Note: The test results have deviations, please refer to the actual situation.)
Lock:Hold down the two switches at the same time to enter the lock mode to prevent you from accidentally turning on the flashlight. Press and hold both switches for 1 second to unlock.
(When you receive the flashlight, you need to press two switch buttons to unlock it at the same time.）
Temperature control protection:When the temperature of the flashlight is higher than 50 degrees Celsius, the flashlight will automatically reduce the brightness by 50%-30%. If the flashlight temperature drops to 40 degrees Celsius, the flashlight brightness will be restored to
100%. If you use a flashlight underwater, the flashlight temperature will be lower than 40 degrees Celsius. So it is recommended that you use a flashlight underwater.
1：Unscrew the screw, you can use the mobile phone charger to charge the flashlight. During the charging process, the switch indicator shows red. After the battery is fully charged, the switch indicator turns blue.
2：Before diving, please tighten the charging hole screw to prevent water ingress.
Two switch buttons：
Button 1：white light(5500K-6500K)
*Mode 1:18000Lumens（can work continuously for 90 minutes/Recommended for underwater use）
*Mode 2:9000Lumens（can work continuously for 180 minutes/Recommended for underwater use）
*Mode 3:5000Lumens（can work continuously for 240 minutes/Can be used on land）
*Land use: If you use it on land, it is recommended to use the lowest gear.
*The highest gear will generate a lot of heat, so it is recommended to use it underwater.
*Mode 1: Red light wavelength(620nM)
*Mode 2: Red flash
*Mode 3: Blue light wavelength（455nM）
*Mode 4：Double-click the switch, flashing red and blue
Dimming operation: (For fine-tuning the photography process)
*White light + Red light (4500k-5000k)
*White light + Blue light (6000k-7000k)
1: When the battery power is >30%, the indicator light turns blue. When the battery power is 5%-30%, the indicator light turns red.
2: When the battery is low, the indicator light will flash for 10 seconds and then turn off.
What can you get?
1 x S2 Diving Flashlight ((Built-in 3*4800mah 21700 power battery)
1 x Arm Ball
1 x handle
1 x USB Charging Cable